Views: 0 Author: Site Editor Publish Time: 2026-11-16 Origin: Site
Reverse osmosis membrane has ultra-fine pore structure, which intercepts nearly all dissolved solids including lactose, proteins and inorganic salts. Under sufficient transmembrane pressure, water molecules penetrate the RO membrane to form permeate, while most dissolved components are retained in the concentrate stream. In whey processing, RO is commonly used for pre-concentration and partial demineralization, reducing feed volume and mineral load for downstream refining units.
Raw sweet whey → Pre-filtration (bag filter / cartridge filter) → Security filter → RO membrane stack → Permeate (recycled clean water) → RO concentrate (whey stream with elevated solids and partial mineral reduction) → Next stage (NF / ion exchange / spray drying)
Low thermal load: Operates at ambient or mild temperature, protects whey protein activity without thermal degradation.
Water recovery: RO permeate can be reused for CIP cleaning or production water supply, cutting water consumption.
Energy saving: Compared with multi-effect evaporator, RO consumes much less energy at low concentration multiples.
Compact layout: Modular skid-mounted design, easy to integrate into existing dairy production lines.
Whey contains protein, fat and calcium phosphate scaling components, which easily cause organic fouling and inorganic scaling on RO surface.
Daily maintenance: Stable pH control, avoid supersaturation of calcium salts.
Regular CIP: Alkaline cleaning for organic protein fouling; acid cleaning for mineral scale.
Monitoring indicator: Track TMP, permeate flow rate and salt rejection to judge cleaning timing.
RO cannot achieve high-degree demineralization alone. It is usually a pre-treatment step. For high-demineralized whey powder (70%–90% ash removal), RO concentrate will further go through nanofiltration or electrodialysis.
Reverse osmosis is a mature and economical unit operation for whey pre-concentration and preliminary demineralization in dairy industry. Proper pre-treatment and standardized CIP management extend RO membrane service life significantly. Combined with other separation technologies, it helps manufacturers obtain high-value demineralized whey products and improve the comprehensive utilization rate of whey by-products.